Iridium worldwide Solar Asset Tracker

Iridium SBD Global tracking + Global IoT .   switch to iridium signal if no GSM cell phone signal.

PRODUCTS CATEGORIES
PRODUCT DESCRIPTION

Iridium Solar Asset Tracker

iridium tracking1

Cellular / Satellite worldwide coverage

Solar Charging. High-efficiency solar charging

IP67 Protection Rating. Rainstorm level protection

Support Bluetooth 5.0

Wi-fi Fixed position

Ultra-Robust impact resistant case

Anti-disassembly Alarm

Remote OTA upgrade

Extra-long Battery Life

 

The JX-i20 is built for harsh environments, offering a “deploy and forget” tracking solution for  containers, vessels, trailers, and rail cars globally. Its self-cleaning solar panel and high-capacity battery work together to eliminate frequent charging and maintenance.

The device uses smart multi-mode logic to switch between real-time tracking during movement and low-frequency reporting when idle—optimizing both battery life and data transmission. With global LTE Cat1 and optional satellite connectivity, it stays online even in remote or cross-border routes.

More than a tracker, JX-i20 is a sensing hub. Its built-in sensors detect impacts, tilt, tampering, and vibration in real time, while Bluetooth and additional sensors can monitor temperature, door status, fuel levels, and more—keeping your assets fully secure and visible.

Application :

application1    application5

application 4

 

  1. Specifications

 

1.1 Host Parameters

 

Size(Excluding Cables) 256 (length) mm × 82 (width) mm × 32 (thickness) mm
Outer Shell Material PC+GF30 (Fiber-reinforced)
Weight 600g (excluding packaging)
Working Voltage 3.7V
Internal Battery 6 x ICR18500  12000mAh/3.7V
Charging Voltage Type-C charging: 5V/2A
Car Charging 9-50V (optional)
Solar Charging Maximum 400mA
Levels Of Protection IP67/IP69K
Working Temperature -20 °C ~+70 °C
Installation Method Screw/magnetic/iron band/3M adhesive
 

BLE

BLE 5.0 supports external Bluetooth accessories: oil rod, temperature  and  humidity  sensor,  door  magnet,  and relay
Wi-Fi Wi-Fi scan and location (optional)

 

 

1.2 Communication Features

 

 

LTE

Global Edition

LTE FDD:B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66

LTE TDD:B34/B38/B39/B40/B41 GSM:850/900/1800/1900 MHz

GSM 850/900/1800/1900 MHz
Maximum Output LTE FDD: 23dBm±2dBm

LTE TDD: 23dBm±2dBm

GSM: 30dBm±2dBm; 33±2dBm;

Antenna FPC antenna

 

 

1.3 GNSS Features

 

Positioning Mode GPS, BEIDOU, GLONASS, GALILEO, supports dual-mode configuration and lbs-assisted positioning
Positioning Accuracy <2.5 meters
Tracking Sensitivity -163dbm
Acquisition Sensitivity -158dbm
Antenna Built-in ceramic antenna

 

1.4 Sensors

 

Acceleration Transducer Built-in 6-axis accelerometer supports collision and rollover detection
Tamper Proof Sensor Hall anti-tampering, a more reliable anti-tampering mode
Fall Detection The device supports water immersion detection and alarm

 

1.5 Interface

 

TYPE-C charging and equipment debugging interface
SIM Supports Micro SIM and e-SIM
 

LED

3 indicator lights

The red indicator shows the charging status.

The blue indicator light shows the GPS signal

The yellow indicator light displays the communication signal.

12-line interface The   expandable   wiring    is   used   for   vehicle    battery   charging    and   extended functionality, suitable for trailer scenarios (optional)

 

1.6 Satellite Features (Optional)

 

Satellite Coverage LEO global mode coverage
Satellite Frequency Band 1616~1626.5MHz

 

1.7 Functions

 

Firmware Upgrade Supports OTA remote upgrade and PC online upgrade
 

 

 

 

Device Power Consumption

Does not include solar charging Continuous Mode:

1 report/30 seconds(Connect the platform during the stationary period,working 2 hours per day) : 30days

1 report/30 seconds(Disconnect the platform during the stationary period,working 2 hours per day) : 80days

Sleeping Mode:

6 report/hour: 80days

1 report/hour: 1 year

1 report/day:  3 years

Protocol GT06
Transmission Mode TCP
Basic Function Electronic fence alarm, low power alarm, water fall alarm, collision alarm, rollover alarm, vibration alarm, anti-dismantling alarm
External   Expansion   Wiring Function ACC alarm, power and fuel cutoff, remote door control, SOS alarm (external SOS), fuel level detection (external fuel rod)
External                 Bluetooth

Accessory

Temperature and humidity monitoring, door opening/closing detection, fuel level monitoring, and power-off/switching (via Bluetooth relay)
Charge A 5V/2A Type-C charger can fully charge the device in about 8 hours.

 

Intelligent tracking mode

When the motion sensor detects the device moving, it will wake up the device, keep it working, and upload the location data in real time. When the device stops moving it will enter to sleep status. During the sleep period, the device reports heartbeat

information and maintains a connection with the platform, allowing for the immediate issuance of instructions.

 

Timed positioning mode

Whether  the motion sensor detects the device moving or not, the device keep working, and upload the location data in certain time. This mode consumes an extremely large amount of power.

 

Energy-saving mode

When the motion sensor detects moving, it will  wake up the device, uploads a location data, and then enters sleep status.When device stops moving, the device wakes up again to upload a location data, and then enter to sleep status.In this mode, you can see the starting and ending locations of the device for a certain distance.

When the motion sensor detects the device moving, it will wake up the device, keep it working, and upload the location data in real time. When the device stops moving it will enter to sleep status. During sleep status, the device does not report location   data or send heartbeat signals, the device will go offline.Vibration can wake the device.This mode displays the device’s full

journey trajectory.

 

Alarm mode

The device enters sleep mode and wakes up at a certain time to upload location data.During sleep status, the device does not report location data or send heartbeat signals. Vibration cannot wake the device; only the Hall anti-tamper alarm can trigger activation.

iridium tracking 600 3

Iridium cost :

SIM card and active cost : $88

SBD-12   $50 / Month , 12K Byte

SBD-30 ,  $98 / Month , 30K Byte

Global IoT SIM Card :  30M / Year , Cost :  $28 .

System Monitoring Platform Tracking account : $35 / Year

 

RELATED PRODUCTS
Scroll to Top

Get A Free Quote Now !

Contact Form Demo (#3)
Scan the code