CX5003 NMEA 2000 Digital-to-Analog Converter for Yacht Generator Engines NMEA 2000 Signal

CX5003 NMEA 2000 Digital-to-Analog Converter for Yacht Generator Engines NMEA 2000 Signal

NMEA2000 N2K Converter

Features

  1. Acquisition of sensor parameters and convert to NMEA2000 parameters
  2. Up to 18 sensors can be collected

 

PRODUCTS CATEGORIES
PRODUCT DESCRIPTION

CX5003 Dual NMEA2000 Converter

CX5003 NMEA 2000 Digital-to-Analog Converter for Yacht Generator Engines NMEA 2000 Signal

nmea2000 converter CX-5003

Features

  1. Acquisition of sensor parameters and convert to NMEA2000 parameters
  2. Up to 18 sensors can be collected

Sensor Parameter(customizable)

Speed ratio adjustable range is 1~200

Engine tlt/trim 0~190ohm

Oil pressure 10~184ohm(0~10bar)

Tepmerature 301~22ohm(40~120℃)

Rudder 0~190ohm

Fuel level 0~190ohm

Freshwater level 0~190ohm

Wastewater level 0~190ohm

 

Environmental

Operating Voltage:                     9 to 32 Volts(DC)

Power Consumption:                <120mA

Operating Temperature:            -30~75degrees

Storage Temperature:               -40~85degrees

Degree of Protection:                IP67

 

Connection

  1. Connect to “Micro-C” NMEA2000 interface
  2. Connect the corresponding interface according to the functional requirements 

 

Mechanical

Size 100mm*68mm*50mm

 

diagram

CX 5003 2

CX 5003 1

**** Remark :

How to make the setting for the tachometer ,  1-128 ,
The dip switch is binary, and 7 dip switches can be set to a speed ratio range of 1-128.   88 teeth means a speed ratio of 88, so you need to set 1011000. This is how you calculate binary. Just set the dip switches corresponding to 1.    7 is high, so the order is reversed.

Setting ratio

 

RELATED PRODUCTS
Scroll to Top

Get A Free Quote Now !

Contact Form Demo (#3)
Scan the code