60W Loud Hailer with Radio Function .
HK-60 Loud Public Instruction Manual
Product Overview:
The factory produces the HK-60 type loud male walkie-talkie, the use of advanced high integrated circuits, set shouting walkie-talkie, radio in one, the maximum output power of up to 60W, anti-jamming ability, the appearance of the United States rules, reliable performance, simple and convenient to use, especially suitable for ships wired communication.
Use method:

- power switch
- power indicator
- volume control
- channel switch
- channel indicator
- FM tuning switch
- radio power switch
- Tone Indicator
- DC power input terminal block
- external speaker for main unit
- FM radio antenna
- Intercom Speaker Clip
- microphone socket
To use, connect the positive and negative terminals of DC12V- DC24V DC power supply to the corresponding (9) terminal clips, connect the two sets of speakers to the corresponding (12) terminal clips, and extend the radio antenna.
Turn on the (1) power switch, properly adjust the volume control (2), the sound channel switch (4) twisted to the corresponding sound channel, you can talk to each other, hold the host microphone switch, you can shout to the barn, relax the microphone switch, you can answer the barn shouting. Open the radio power switch (7), you can listen to tuned radio, use finished, turn off the power switch (1)
Common troubleshooting methods
Fault
After the power on the indicator does not light up, check the power polarity is not reversed. Confirm whether the positive and negative polarity is connected correctly
The volume is too low when shouting, check whether the volume control is adjusted in place, rotate to the right, adjust the volume.
If the microphone or speaker is not working, replace the microphone or speaker.
After the power on the echo sound, may be the volume control is too big, or the main and vice speakers are too close to each other, adjust to move the vice speakers.

Speaker :
200W , 50W , 20W Speaker


