GMDSS EPIRB Beacon tester upgrade and Calibrations

VRI8A  EPIRB Beacon tester with ais

This tester is developed based on Android system and adopts digital signal processing technology, with friendly interface, simple operation, small volume and low power consumption, which can be widely used for annual inspection and factory test and maintenance of beacons such as EPIRB, PLB, ELT, AIS SART, AIS MOB, and so on.

Work Frequency :406.000-406.100MHz,±1Hz;

121.470-121.530MHz,±1Hz;

161.975/162.025MHz

pic1

EPIRB Beacon tester upgrade update firmware operation method :

If you need updates the imarinex software of VRI8A, you can use the upgraded apk file to upgrade the software of the tester. The specific operation methods are as follows:

1) Connect VRI8A to the computer, turn on the USB storage device function (for details, please refer to section 2.4), and copy the updated BeaconTester.apk file to the disk drive of Download;

2) After copy the program, click ‘Close USB storage device’ in the device interface, after displaying the desktop, click the menu icon at the bottom of the screen to display the application menu interface, find and click the ‘File Management’ function in the list of program, drop down the list to find the latest BeaconTester.apk file, and then click ‘File Management’. Find the latest ‘Download\BeaconTester.apk’ file in the file list, click to open the file to install the program;

3) When the installation process is finished, click ‘ESC’ button continuously until you return to the desktop, when you test again, you can directly click ‘BeaconTester’ icon to start the test program.

 

For calibration , you can contact with to make calibrate , the tester need make calibration every 2 years.   the detail you can visit our website .   www.imarinex.com

 

 

About IMARINEX

Imarinex One-stop ship communication and navigation supplier, originating from China, serving the world.

Share This Page
Get A Free Quote
Contact Form Demo (#3)
Scroll to Top

Get A Free Quote Now !

Contact Form Demo (#3)
Scan the code